SCM Ultrafine Mill

SCM ultrafine mill is a new ultra-fine powder processing equipment our company developed on the basis of accumulated years of experience on mill production, absorbing advanced manufacturing technology in Sweden, and after years of trial and improvement. It is the crystallization of the Swiss advanced technologies, is commanding the latest world trends mill products.



Supply the latest design and technical expertise;Supply parts sales and training service beyond the initial sale;Your profits with quality parts and expert service.

  • Long service life of wearing parts: roller, grinding ring forged from special materials, so that the degree of utilization is greatly improved;
  • Yielding low: at the same fineness and motor power, the ultra-fine grinding than jet mill, mixing mill, ball mill high yield of 40%, while its energy consumption is only one-third of the jet mill;
  • High security and reliability: grinding chamber because no bearings, screws, so no problem wearing bearings and seals as well as screw loosening and destruction due to the presence of the machine;
  • Product fineness: product fineness can be adjusted according to need between 325 mesh to 2500 mesh, disposable product fineness can reach D97 <= 5um;
  • Classifiers effect, dual cyclone powder collector: Combining wind principle and the principle of centrifugal force, and so on, powder collector internal structure optimization improvements can collect disposable ultra-fine powder products;
  • High sealing performance, no dust leak: utilization sealing valve and screw conveyor, which greatly improves the efficiency of the collection finished;
  • Insurance system to improve and reduce the chance of damage to the machine: one before the hoist is installed after the host separator, the second is the internal diameter of the roller is about more than the outside diameter of the shaft pin 40mm, jointly prevent the entry of superhard materials (such as metals), for roller, grinding ring damage.
  • Environmental protection: pulse dust collector and muffler to reduce the use of dust pollution, noise reduction, to achieve national environmental standards, on the surrounding environment pollution.
Name & Model SCM8021 SCM9024 SCM10036 SCM12544
Ring roll number (pcs) 21 24 36 44
Working diameter (mm) Φ800 Φ900 Φ1000 Φ1300
Grinding rill and roller path number (pcs) 1X3 2×4 1×4 2×4
Revolving Speed (rmin) 230-240 200-220 180-200 135-155
Max feed size (mm) ≤10 ≤20 ≤20 ≤20
Final size (mesh) 325-2500 325-2500 325-2500 325-2500
Output (kgh) 400-4500 600-5500 400-7500 1200-12000
contour dimension (mm) 13000×3000×5800 14700×4800×8600 18000×4600×8600 14000×9000×10250
Whole machine capacity (kw) 144-165 185-204 263-290 380-430
Main motor Model YB2-250M-4 YB2-280M-8 YB2-315L1-6 YB2-315L2-6
Power (kw) 55 45×2 110 160
Rotate speed (rmin) 1440 980 990 990
Analytical engine (FM motor) Model Y180M-4 Y180L-4 Y100L1-4 YB2-225S-4
Power (kw) 18.5 22 30 37
Rotate speed (rmin) 1440 1440 1440 1440
Blower motor Model Y225M-2 Y250M-2 Y280M-2 YB2-250M-2
Power (kw) 45 55 75 55×2
Rotate speed (rmin) 2940 2940 2940 2940
Elevator Bucket model TH-200 TH-200 TH-300 TH-300
Motor model Y100L-4 YB2-100L2-4 YB2-112M-4 YB2-112M-4
Motor power (kw) 3 3 4 4
Rotate speed (rmin) 1440 1440 1440 1440
Hammer Crusher Hammer Crusher model PC300×400 PC400×600 PC400×600 PC600×800
Motor model YB2-160M-4 YB2-180M-4 YB2-180M-4 YB2-280S-6
Power (kw) 11 18.5 18.5 45
Rotate speed (rmin) 1440 1440 1440 990
Magnetic vibrating feeder Model GZ1F GZ1F    
Power (kw) 0.06 0.06    
Electrical machine Model     LS159×1050 LS159×2000
Power (kw)     2.2 3
Discharge valve Discharge valve model ZJD-200 ZJD-200 ZJD-200 ZJD-250
Motor model YB2-80M2-4 YB2-80M2-4 YB2-80M2-4 YB2-90S-4
Power (kw) 0.75×2 0.75×2 0.75×3 1.1
Rotate speed (rmin) 1440 1440 1440 1440
Pulse dust collectors Model DMC120-II model DMC144-II model DMC184-II model DMC160-II model*2
Air compressor Air compressor Model KSH100D-7.5KW KSH240D-15KW KSH240D-15KW KSH240D-15KW×2/td>
Motor model YB2-132M-4 YB2-160L-4 YB2-160L-4 YB2-160L-4
Power (kw) 7.5 15 15 15
Rotate speed (rmin) 1440 1440 1440 1440

SCM ultrafine mill widely used in paint, paper, paint, rubber, plastics, fillers, cosmetics, chemicals and other industries

Applicable materials: non-explosive brittle material and Mohs hardness < 9, such as: coal, mica, talc, graphite, quartz, fluorite, calcite, limestone, dolomite, kaolin, bentonite, barite, feldspar , flint, coal, etc.